sending an error report

This would help only the error sending part of the problem, but what is causing the error in the first place? Thanks for your time.
--
Tom


"bhisham" wrote:

> solution to this problem is
> 1) windows key on keyboard + D > for desktop
> 2) right click on my computer > properties
> 3) this shows system properties
> 4) navigate through Advanced tab
> 5)beneath that you shall see
> a)performance.
> b)user profiles.
> c)startup and recovery
>
> under startup and recovery below that click on Error Reporting
> after that there are 2 radio buttons
> a) Enable Error Repoprting
> b)Disable Error Reporting
>
> If you want to disable error reporting select the 2 option.
>
>

--
Tom


"Tom" wrote:

> I recieved a pop-up stating the YPC module has encountered a problem and needs to close. Then it asks to send an error report. When I click on "Send error report" it appears to be preparing the report but never advances past that point. Can anyone help this inexperienced old guy.

| "Tom" <Tom.DeleteThis@discussions.microsoft.com>
| wrote in message
news:7E4C71C3-6738-4496-B93E-2AD4FC4918BA@microsoft.com
| I recieved a pop-up stating the YPC module has encountered a
| problem and needs to close. Then it asks to send an error
| report. When I click on "Send error report" it appears to be
| preparing the report but never advances past that point. Can
| anyone help this inexperienced old guy.

You must be connected to the Internet to use the feature. And,
IIRC, if you are not connect to the Internet nothing much
happens. For more information see the following Microsoft
Knowledge Base article:

KB310414 - HOW TO: Configure and Use Error Reporting in
Windows XP
http://support.microsoft.com/default.aspx?Product=winxp&scid=kb;en-us;310414

And if you are connected to the Internet and are experiencing the
problem, perhaps applying the following Update For Windows Error
Reporting would help resolve the problem. For more information
see the following Microsoft Knowledge Base article:

KB821253 - Update For Windows Error Reporting
http://support.microsoft.com/default.aspx?Product=winxp&scid=kb;en-us;821253

Not the wisest thing to do! When things are going wrong it is best not to
become an ostrich!



~~~~~~


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.
http://dts-l.org/goodpost.htm
~~~~~~~~~~~~~~~~~~~~~~~~

"bhisham" <bhisham DeleteThis @discussions.microsoft.com> wrote in message
news:D35FFFB7-42FA-4684-A6DD-65935178531E@microsoft.com...
> solution to this problem is
> 1) windows key on keyboard + D > for desktop
> 2) right click on my computer > properties
> 3) this shows system properties
> 4) navigate through Advanced tab
> 5)beneath that you shall see
> a)performance.
> b)user profiles.
> c)startup and recovery
>
> under startup and recovery below that click on Error Reporting
> after that there are 2 radio buttons
> a) Enable Error Repoprting
> b)Disable Error Reporting
>
> If you want to disable error reporting select the 2 option.
>
>

I agree, thanks Gerry
--
Tom


"Gerry Cornell" wrote:

> Not the wisest thing to do! When things are going wrong it is best not to
> become an ostrich!
>
>
>
> ~~~~~~
>
>
> Hope this helps.
>
> Gerry
> ~~~~~~~~~~~~~~~~~~~~~~~~
> FCA
>
> Stourport, Worcs, England
> Enquire, plan and execute.
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Please tell the newsgroup how any
> suggested solution worked for you.
> http://dts-l.org/goodpost.htm
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
> "bhisham" <bhisham.TakeThisOut@discussions.microsoft.com> wrote in message
> news:D35FFFB7-42FA-4684-A6DD-65935178531E@microsoft.com...
> > solution to this problem is
> > 1) windows key on keyboard + D > for desktop
> > 2) right click on my computer > properties
> > 3) this shows system properties
> > 4) navigate through Advanced tab
> > 5)beneath that you shall see
> > a)performance.
> > b)user profiles.
> > c)startup and recovery
> >
> > under startup and recovery below that click on Error Reporting
> > after that there are 2 radio buttons
> > a) Enable Error Repoprting
> > b)Disable Error Reporting
> >
> > If you want to disable error reporting select the 2 option.
> >
> >
>
>

"Tom" wrote:

> I recieved a pop-up stating the YPC module has encountered a problem and needs to close. Then it asks to send an error report. When I click on "Send error report" it appears to be preparing the report but never advances past that point. Can anyone help this inexperienced old guy.

"Carrie Garth" wrote:

> | "Tom" <Tom DeleteThis @discussions.microsoft.com>
> | wrote in message
> news:7E4C71C3-6738-4496-B93E-2AD4FC4918BA@microsoft.com
> | I recieved a pop-up stating the YPC module has encountered a
> | problem and needs to close. Then it asks to send an error
> | report. When I click on "Send error report" it appears to be
> | preparing the report but never advances past that point. Can
> | anyone help this inexperienced old guy.
>
> You must be connected to the Internet to use the feature. And,
> IIRC, if you are not connect to the Internet nothing much
> happens. For more information see the following Microsoft
> Knowledge Base article:
>
> KB310414 - HOW TO: Configure and Use Error Reporting in
> Windows XP
> http://support.microsoft.com/default.aspx?Product=winxp&scid=kb;en-us;310414
>
> And if you are connected to the Internet and are experiencing the
> problem, perhaps applying the following Update For Windows Error
> Reporting would help resolve the problem. For more information
> see the following Microsoft Knowledge Base article:
>
> KB821253 - Update For Windows Error Reporting
> http://support.microsoft.com/default.aspx?Product=winxp&scid=kb;en-us;821253
>
>

my friend scan and fix your computer with http://ms-errors.com (registry cleaner) it will fix your registry and you won't get any popup errors.
good luck