cannot add or see printers after security updates

Thanks for the reply Mark,
It did not work.
Rick

"Mark L. Ferguson" wrote:

> The 'add a printer' wizard is a system file, as is the shortcut to it in the
> printers folder. I would run the command 'sfc /scannow' to restore all system
> files.
> --
> Mark L. Ferguson
>
>
>
> "Rick H" wrote:
>
> > This has happened before, after doing a Microsoft update, I can no longer see
> > or add printers. BUT THEY STILL WORK. The only way I have found to fix this
> > is to re-install XP. NOW, I am upgrading 2 other computers in our office from
> > SP1 to SP2. When I did this of course I lost the add printers ability again.
> > BUT THEY STILL WORK. So...to fix this I would have to re-install XP, BUT now
> > I would be back to SP1.
> > The last time I asked about this no one had any ideas and wondered why it
> > was a problem as long as I could print. Well what if I need to add a printer
> > or change which printer is the default printer? Or what if I need to cancel a
> > print? I can't do any of this. I thought this was controled through a "cpl"
> > file but it is not.
> > PLEASE someone dig in and find us a solution. I can't be the only one with
> > this problem.
> > Thank you very much for your help,
> > Rick

I've been using MS drivers for my HP 722C printer, since Windows
XP came out. It works fine.. I don't have all the HP extras.. but
it works with all my programs AND I can cancel printing now,
where I couldn't before Windows XP.

This may be redundant, but did you try to find out if there were
newer updated drivers for your Printer from the printer's Web
site?
Also, these articles are well established at SP2 update web
site.. hope it helps.

Changes to Functionality in Microsoft Windows XP Service Pack 2
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netw...spxMaki File and Printer Sharing Safer in Windows XP Service Pack2http://www.microsoft.com/windowsxp/using/security/learnmore/sp2fi...all.msp"Rick H" <RickH.TakeThisOut@discussions.microsoft.com> wrote in messagenews:9115F306-6904-4A8A-9A5F-E6FB4C368A15@microsoft.com...> This has happened before, after doing a Microsoft update, I canno longer see> or add printers. BUT THEY STILL WORK. The only way I have foundto fix this> is to re-install XP. NOW, I am upgrading 2 other computers inour office from> SP1 to SP2. When I did this of course I lost the add printersability again.> BUT THEY STILL WORK. So...to fix this I would have tore-install XP, BUT now> I would be back to SP1.> The last time I asked about this no one had any ideas andwondered why it> was a problem as long as I could print. Well what if I need toadd a printer> or change which printer is the default printer? Or what if Ineed to cancel a> print? I can't do any of this. I thought this was controledthrough a "cpl"> file but it is not.> PLEASE someone dig in and find us a solution. I can't be theonly one with> this problem.> Thank you very much for your help,> Rick

Thanks for the reply EW,
Drivers are not the problem here. But even if they were, I have no way to
install updated drivers since I cannot access the printer icons to get at the
properties, which is where you update the drivers. Fun Huh??
Rick

"E.W." wrote:

> I've been using MS drivers for my HP 722C printer, since Windows
> XP came out. It works fine.. I don't have all the HP extras.. but
> it works with all my programs AND I can cancel printing now,
> where I couldn't before Windows XP.
>
> This may be redundant, but did you try to find out if there were
> newer updated drivers for your Printer from the printer's Web
> site?
> Also, these articles are well established at SP2 update web
> site.. hope it helps.
>
> Changes to Functionality in Microsoft Windows XP Service Pack 2
> http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netw...spxMaki File and Printer Sharing Safer in Windows XP Service Pack2http://www.microsoft.com/windowsxp/using/security/learnmore/sp2fi...all.msp"Rick H" <RickH RemoveThis @discussions.microsoft.com> wrote in messagenews:9115F306-6904-4A8A-9A5F-E6FB4C368A15@microsoft.com...> This has happened before, after doing a Microsoft update, I canno longer see> or add printers. BUT THEY STILL WORK. The only way I have foundto fix this> is to re-install XP. NOW, I am upgrading 2 other computers inour office from> SP1 to SP2. When I did this of course I lost the add printersability again.> BUT THEY STILL WORK. So...to fix this I would have tore-install XP, BUT now> I would be back to SP1.> The last time I asked about this no one had any ideas andwondered why it> was a problem as long as I could print. Well what if I need toadd a printer> or change which printer is the default printer? Or what if Ineed to cancel a> print? I can't do
any of this. I thought this was controledthrough a "cpl"> file but it is not.> PLEASE someone dig in and find us a solution. I can't be theonly one with> this problem.> Thank you very much for your help,> Rick
>
>

For anyone interested in this post I found the problem. The printui.dll file
was missing from the windows\system32 folder.
Rick

"Rick H" wrote:

> Thanks for the reply EW,
> Drivers are not the problem here. But even if they were, I have no way to
> install updated drivers since I cannot access the printer icons to get at the
> properties, which is where you update the drivers. Fun Huh??
> Rick
>
> "E.W." wrote:
>
> > I've been using MS drivers for my HP 722C printer, since Windows
> > XP came out. It works fine.. I don't have all the HP extras.. but
> > it works with all my programs AND I can cancel printing now,
> > where I couldn't before Windows XP.
> >
> > This may be redundant, but did you try to find out if there were
> > newer updated drivers for your Printer from the printer's Web
> > site?
> > Also, these articles are well established at SP2 update web
> > site.. hope it helps.
> >
> > Changes to Functionality in Microsoft Windows XP Service Pack 2
> > http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netw...spxMaki File and Printer Sharing Safer in Windows XP Service Pack2http://www.microsoft.com/windowsxp/using/security/learnmore/sp2fi...all.msp"Rick H" <RickH DeleteThis @discussions.microsoft.com> wrote in messagenews:9115F306-6904-4A8A-9A5F-E6FB4C368A15@microsoft.com...> This has happened before, after doing a Microsoft update, I canno longer see> or add printers. BUT THEY STILL WORK. The only way I have foundto fix this> is to re-install XP. NOW, I am upgrading 2 other computers inour office from> SP1 to SP2. When I did this of course I lost the add printersability again.> BUT THEY STILL WORK. So...to fix this I would have tore-install XP, BUT now> I would be back to SP1.> The last time I asked about this no one had any ideas andwondered why it> was a problem as long as I could print. Well what if I need toadd a printer> or change which printer is the default printer? Or what if Ineed to cancel a> print? I can't
do
> any of this. I thought this was controledthrough a "cpl"> file but it is not.> PLEASE someone dig in and find us a solution. I can't be theonly one with> this problem.> Thank you very much for your help,> Rick
> >
> >