Remote Desktop hanging on XP Pro

I'm having a problem with my Remote Desktop capability on my PC that's
recently appeared. I can successfully login to the PC and authenticate. The
RD window appears on the client, but things freeze about halfway (it starts
drawing half the screen, then stops). Neither the remote or local keyboard
will work, so I'm left with no option but to reset the server PC.

Strangely, a similar happened when I set up the same PC as an Ultra VNC
server. Things were fine as long as both the client and server PC had both
monitor and keyboard access. But when I disabled input on the server side
(via the toolbar on my VNC session), I lost keyboard input on the VNC client
as well.

So as near as I can figure, something's getting trashed when the "handoff"
of the video and inputs goes from the local server PC to the remote client.
But darned if I know what. I've got NIS 2008 and Spy Doctor 5.1.x, but I
can't imagine either being the culprit.

Any ideas?

Thanks,

matt

You may want to test the MTU. This search result may help.

Troubleshooting terminal server issuesTroubleshooting Terminal Services
Licensing issues · Troubleshooting Remote Desktop Connection. Black screen
while connecting to TS. Cause: 1. MTU size may ...
www.chicagotech.net/troubleshootingts.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Matt" <Matt RemoveThis @discussions.microsoft.com> wrote in message
news:321C6C05-9337-4A1A-9F2C-BC981B40C9EC@microsoft.com...
> I'm having a problem with my Remote Desktop capability on my PC that's
> recently appeared. I can successfully login to the PC and authenticate.
> The
> RD window appears on the client, but things freeze about halfway (it
> starts
> drawing half the screen, then stops). Neither the remote or local
> keyboard
> will work, so I'm left with no option but to reset the server PC.
>
> Strangely, a similar happened when I set up the same PC as an Ultra VNC
> server. Things were fine as long as both the client and server PC had
> both
> monitor and keyboard access. But when I disabled input on the server side
> (via the toolbar on my VNC session), I lost keyboard input on the VNC
> client
> as well.
>
> So as near as I can figure, something's getting trashed when the "handoff"
> of the video and inputs goes from the local server PC to the remote
> client.
> But darned if I know what. I've got NIS 2008 and Spy Doctor 5.1.x, but I
> can't imagine either being the culprit.
>
> Any ideas?
>
> Thanks,
>
> matt