Anyone try and fix the crate led board on Scared Stiff?

On Jul 4, 8:20 pm, Jim Davis <4t9... RemoveThis @surewest.net> wrote:
> Hello,
>
> I have 2 led's out on my Scared Stiff crate led board. Is this worth
> fixing or should I get another board? Thanks
>
> Jim

If you can solder, I'd say just replace the LEDs.

On Jul 4, 10:14 pm, "John Wart, jr" <johnwar....TakeThisOut@johnwartjr.com> wrote:
> I just replaced the LEDs on mine. I got the LEDs from PBR using the part #s
> from the manual.
>
> I replaced them all, just to make sure they matched - as several of them
> were not original.
>
> Not tough.
>
> "Jim Davis" <4t9....TakeThisOut@surewest.net> wrote in message
>
> news:11b4c379-d96c-4cca-a458-b8963ca09754@a37g2000prf.googlegroups.com...
>
>
>
> > Hello,
>
> > I have 2 led's out on my Scared Stiff crate led board. Is this worth
> > fixing or should I get another board? Thanks
>
> > Jim- Hide quoted text -
>
> - Show quoted text -

I also replaced all mine and even tried different colors, but switched
back to red. If you're handy with soldering, its very easy. Radio
shack has a 3mm led in stores, but I don't know the brightness so it
might not match. I've also seen them at Fry's if you have one
nearby. I ordered all mine from Mouser electronics and they work
perfectly.

I just replaced the LEDs on mine. I got the LEDs from PBR using the part #s
from the manual.

I replaced them all, just to make sure they matched - as several of them
were not original.

Not tough.


"Jim Davis" <4t9ers.DeleteThis@surewest.net> wrote in message
news:11b4c379-d96c-4cca-a458-b8963ca09754@a37g2000prf.googlegroups.com...
> Hello,
>
> I have 2 led's out on my Scared Stiff crate led board. Is this worth
> fixing or should I get another board? Thanks
>
> Jim

> I also replaced all mine and even tried different colors, but switched
> back to red.  If you're handy with soldering, its very easy.  Radio
> shack has a 3mm led in stores, but I don't know the brightness so it
> might not match.  I've also seen them at Fry's if you have one
> nearby.  I ordered all mine from Mouser electronics and they work
> perfectly.- Hide quoted text -
>

Hmmm, the different colors sounds cool as long as you do them in
pairs. What did not look right?

I have the Robert Winter kit for the skull pile and it looks great. I
do have a spare crate board somewhere and was thinking of trying Red,
Green, Yellow and Blue sets of eyes.

Dave "Taxman" http://www.pinbald.com