how do you clear limits

The numbers in the limits menu will not change until the dish has reached the same
position as the count for the limit.


"wolf2" <wilfj.RemoveThis@hotmail.com> wrote in message news:%0%8e.1066563$Xk.343744@pd7tw3no...
| setting up 920 I just received. This is used of course and I can get G5 but
| nothing past. I can't clear the limits which were set-up by the precious
| owner......is there an entry code for resetting the limits??
| . I can get to the menu but unable to reset the number counts. I can move
| the dish east and west in Picture adjustment.. but the limits don't change.
| help!! Thanks
|
|

Thanks fellows for your immediate response! I found the problem after
getting a few hours sleep.... being I connected the 5 volt wire to the
actuary, I have a Reed switch so it's not required . SO SIMPLE.
Now I'm having a problem with the V/H split One side is great excellent
pic, just can't get the H to lock in. I'm checking connections now. Thanks
again.
"DRLev" <fake.DeleteThis@ddress.tv> wrote in message
news:Lf09e.19165$hu5.2587@tornado.texas.rr.com...
> The numbers in the limits menu will not change until the dish has reached
the same
> position as the count for the limit.
>
>
> "wolf2" <wilfj.DeleteThis@hotmail.com> wrote in message
news:%0%8e.1066563$Xk.343744@pd7tw3no...
> | setting up 920 I just received. This is used of course and I can get G5
but
> | nothing past. I can't clear the limits which were set-up by the precious
> | owner......is there an entry code for resetting the limits??
> | . I can get to the menu but unable to reset the number counts. I can
move
> | the dish east and west in Picture adjustment.. but the limits don't
change.
> | help!! Thanks
> |
> |
>
>

Check that you have the right feedhorn and servo set in the dish
settings,too.

"wolf2" <wilfj RemoveThis @hotmail.com> wrote in message
news:BKm9e.1076000$Xk.657070@pd7tw3no...
> Thanks fellows for your immediate response! I found the problem after
> getting a few hours sleep.... being I connected the 5 volt wire to the
> actuary, I have a Reed switch so it's not required . SO SIMPLE.
> Now I'm having a problem with the V/H split One side is great excellent
> pic, just can't get the H to lock in. I'm checking connections now. Thanks
> again.
> "DRLev" <fake RemoveThis @ddress.tv> wrote in message
> news:Lf09e.19165$hu5.2587@tornado.texas.rr.com...
>> The numbers in the limits menu will not change until the dish has reached
> the same
>> position as the count for the limit.
>>
>>
>> "wolf2" <wilfj RemoveThis @hotmail.com> wrote in message
> news:%0%8e.1066563$Xk.343744@pd7tw3no...
>> | setting up 920 I just received. This is used of course and I can get G5
> but
>> | nothing past. I can't clear the limits which were set-up by the
>> precious
>> | owner......is there an entry code for resetting the limits??
>> | . I can get to the menu but unable to reset the number counts. I can
> move
>> | the dish east and west in Picture adjustment.. but the limits don't
> change.
>> | help!! Thanks
>> |
>> |
>>
>>
>
>