FabulaTech:
USB over Network 4.1.1

Updated

Share your USB device without risk of losing it! Access remote instruments without leaving your chair! USB is the standard interface used by most modern computer devices today. But, USB was designed to connect electronic peripherals only to a single computer. USB Over Network is a revolutionary software solution that allows you to use remote USB devices as if they were plugged into your own PC. [more]

5 MB

US$ 229.00, EU€ 170.81, GB£ 152.73

FabulaTech:
Serial Port Mapper 1.5

Serial Port Mapper allows you to map any serial ports to any other serial ports. For example you install additional serial port expansion card to computer as COM7 serial port but your favorite software can work with COM1...COM4 ports only. To resolve this problem you can use Serial Port Mapper to map new COM7 port either to COM1 or to COM2...COM4. Now your software can open COM1 port (or COM2...COM4) but actually work with new COM7 port. [more]

2 MB

US$ 129.00, EU€ 96.22, GB£ 86.04

FabulaTech:
Virtual Serial Port Kit 5.2.2

Virtual Serial Port Kit creates pairs of virtual serial ports in your system which are virtually connected to each other. Physical null modem cables are not required. You can connect any number of virtual port pairs. Virtual serial port pairs will look and work exactly like real hardware serial ports connected via null modem cables.Virtual Serial Port Kit is designed for software developer to speed up development process during software debugging [more]

3 MB

US$ 129.00, EU€ 96.22, GB£ 86.04

FabulaTech:
Network Serial Port Kit 5.6.2

You can connect data collection serial devices: bar code scanners, modems, sensors, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well. [more]

4 MB

US$ 269.00, EU€ 200.65, GB£ 179.41

FabulaTech:
Virtual Modem 2.1

There are many old communication applications that require a direct modem connection. This program allows you to substitute physical phone lines with a local TCP/IP network or the Internet without investing thousands into new communication software. It works out-of-the-box with all Windows gpplications that require a modem connection. The Address Book feature allows it to transparently translate phone numbers into IP addresses. [more]

4 MB

US$ 149.00, EU€ 111.14, GB£ 99.38

FabulaTech:
USB Monitor Pro 2.2.1

USB Monitor Pro is an effective and, at the same time, simple in use analyzer of USB traffic for Windows. It allows to monitor incoming and outgoing data of a USB device plugged into the computer. USB Monitor Pro is a complete software solution, so you don't need any additional expensive hardware solutions. It's an indispensable tool for a developer of firmware and drivers for USB devices, expanding developer's arsenal. [more]

2 MB

US$ 199.00, EU€ 148.43, GB£ 132.73

FabulaTech:
Serial Port Splitter 4.0.3

Serial Port Splitter allows to share dataflow of one COM port between several applications or vice versa to join dataflow of several COM port devices to one application. Such program universality is achieved by means of virtual serial ports technologies. Moreover Serial Port Splitter allows to setup READ/WRITE or READ ONLY mode for splitted ports and READ/WRITE or WRITE ONLY mode for joined serial ports. [more]

3 MB

US$ 129.00, EU€ 96.22, GB£ 86.04

FabulaTech:
Serial Port Control 2.1.4

Serial Port Control is an inexpensive royalty-free component. You can use it with any development environment, such as VB, VB .Net, VC++, C#, Delphi, etc. Just put it on a form and vou've got all the functionality you need to access an RS232 port. The event driven architecture makes it a snap to use. Just define a function in your program and it will be triggered automatically when new data is available through the port. [more]

3 MB

US$ 699.00, EU€ 521.38, GB£ 466.21

FabulaTech:
Serial Port Redirector 2.2.3

Serial Port Redirector is used to connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that can only connect to a serial port. This is done by creating virtual COM ports. Virtual COM ports accept connections from serial applications and redirect the data to a specified IP address/port. [more]

5 MB

US$ 99.00, EU€ 73.84, GB£ 66.03

FabulaTech:
USB for Remote Desktop 2.6.1

USB for Remote Desktop allows to work with your local USB devices from remote Windows session. The program consists of a Server and a Workstation. It supports a wide range of USB devices and does not require any special knowledge and installs easily right out of the box. [more]

5 MB

US$ 199.00, EU€ 148.43, GB£ 132.73

FabulaTech:
Sound over RDP 2.1

Sound over RDP is a sound virtualization tool which was built specifically to share sound devices from the local machine to the remote computer. Many applications use sound for various forms of feedback such as softphones, Skype, NetMeeting, AIM, ICQ and many others. Sound over RDP extends standard RDP functionality and delivers full high-resolution low-latency remote audio playback. [more]

1 MB

US$ 99.00, EU€ 73.84, GB£ 66.03